LawnMaster L10, Инструкция по эксплуатации

Страница: 29 / 40

29
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The robotic
lawnmower is stuck
during mowing.
Grass or other debris is wrapped
around the wheels. Check wheels and remove the grass
or objects.
Grass or other debris is wrapped
around the blade turning disc.
Check the blade turning disc and
remove the grass or objects (always
wear gardening gloves).
The blade disc lies in a pool of
water.
Move the robotic lawnmower and
prevent the collection of water in the
working area.
The robotic lawnmower has got
caught in something. Free the mower and remove the
obstacle.
The robotic lawnmower is stuck
behind a number of obstacles.
Check if there are any obstacles
which make it hard for the robotic
lawnmower to move on from this
location. Remove the obstacles.
The mower is stuck in an uneven
dip or hollow in the lawn.
Ensure that dips and holes in the lawn
are leveled with topsoil and over-
seeded with grass seed.
The lift sensor has been activated
as the mower has become
trapped.
Free the mower.
No boundary wire
signal.
No power.
Make sure the power cord is
connected properly to the power
adaptor and the power adaptor is
connected to a suitable power supply.
Check the wall socket connection and
whether an earth-fault breaker has
tripped or not.
Only perform the steps described within these instructions! All further inspection, maintenance and
UHSDLUZRUNPXVWEHSHUIRUPHGE\DTXDOL¿HGVSHFLDOLVW
Gloves and appropriate protective clothing must be worn when performing these instructions.
Always turn off the mower before making any adjustment. Parts can be purchased from
www.cleva-europe.com.
WARNING