LawnMaster L10, Инструкция по эксплуатации

Страница: 18 / 40

18
ASSEMBLY
Do not make new holes in the plate of the base station. Only use the existing holes in the base
station to secure it to the ground.
WARNING
Do not tread or walk on the plate of the base station (Fig. 22).
WARNING
Connect the Base Station to the Power Source (See Figs. 23-25)
Ŷ7RFRQQHFWWKHEDVHVWDWLRQ¶VSRZHUFRUGWRWKHSRZHUDGDSWRUDOLJQWKHQRWFKRQWKHSRZHU
cord ( ) with the groove on the adaptor ( ) and turn the locking sleeve ( ) clockwise to
lock into place (Fig. 23 & 24).
Ŷ&RQQHFWWKHH[WHQVLRQFDEOHWRWKHSRZHUDGDSWRU3RVLWLRQWKHSRZHUDGDSWRUDQGWKH
extension cable on the ground as shown to protect from water (Fig. 25).
Ŷ&RQQHFWWKHH[WHQVLRQFDEOHWRD9ZDOOVRFNHW,IWKHSRZHUVXSSO\LVFRQQHFWHGWR
an electrical outlet outdoors, make sure the electrical outlet is always in a dry place and the
wattage is compatible with the mower.
When the boundary wire and base station are connected successfully and the power adaptor
is connected to an electrical outlet, the LED on the base station will turn on green continuously.
'RQRWSXWWKHSRZHUFRUGLQWKHZRUNLQJDUHDGH¿QHGE\WKHERXQGDU\ZLUHRUWKHPRZHUPD\FXW
the power cord.
5HFKDUJHWKHPRZHURQO\ZLWKWKHEDVHVWDWLRQVSHFL¿HGE\WKHPDQXIDFWXUHU,QFRUUHFWXVHPD\
result in electric shock, overheating or leakage of corrosive liquid from the battery.
WARNING
WARNING
2
3
1
NOTE: Make sure the boundary wire is straight and tight between the hook (C) and terminal (A).
Extra boundary wire should be cut off to avoid disrupting the robotic lawnmower (Fig. 20).
NOTE: The boundary wire should not be crossed when connecting to the base station. The
starting end of the boundary wire must be connected to the OUT-wire terminal (red) and the end of
the boundary wire to the IN-wire terminal (black).
Ŷ$WWDFKWKHEDVHVWDWLRQWRWKHJURXQGDQGVHFXUHLWZLWKWKHVXSSOLHGIRXUVFUHZV)LJ