LawnMaster GT1415, Руководство оператора

Страница: 13 / 40

13
OPERATION
ADVANCING STRINGS
NOTE: Trimmer is equipped with an auto-feed head.
Do not bump the head to try to advance the line will damage trimmer and
void warranty.
• With the trimmer running, release the switch trigger.
• Wait two seconds, and press the switch trigger.
NOTE: The strings will extend approximately 3/16 in.
with each stop and start of the switch trigger until the strings reach the
length of the grass deflector blade.
Do not cut grass when it is wet. The best results are had on dry grass.
NOTE: It may take up to 10 times of starting and stopping the trimmer
before the line advances all the way and is working properly.
NOTE: Do not move the grass trimmer against the grass until the switch
is pressed, i.e. wait until the trimmer is running.
• For the correct cutting action, swing the grass trimmer to the side as you walk forward, holding it
at an angle of approx. 30° as you do so (see Fig. 12 & Fig. 13) .
• Make several passes to cut long grass shorter step by step from the top (see Fig. 14) .
Fig. 14 Fig. 13 Fig. 12