LawnMaster GT1415, Руководство оператора

Страница: 10 / 40

WARNING
WARNING
10
ASSEMBLY
Before assembly, make sure that the grass trimmer is switched off and
unplugged.
Never use the grass trimmer unless the guard is properly fitted.
Fitting the secondary handle (See Fig. 4 & Fig. 5)
1. Place the handle on the grass trimmer as shown.
2. Adjust the handle to the most comfortable position. Use the marking as a guide.
3. Pass the bolt through the secondary handle and the main handle.
4. Screw the nut into the other side of the bolt. Do not over tighten the bolt.
Fig. 4 Fig. 5
Fitting the guard (See Fig. 2 & Fig. 3)
Fig. 2 Fig. 2 Fig. 2
1. Fit the debris guard onto the motor head as shown.
2. Fasten the debris guard with a screw and the Hex key.
Fig. 3