LawnMaster GT1238, Руководство оператора

Страница: 12 / 22

ASSEMBLY
JOINING THE UPPER SHAFT TO THE MOTOR HEAD (See Figure 6.)
PREPARING THE TRIMMER FOR USE (See Figure 7 & Figure 8.)
1. Align the upper shaft with the lower shaft.
2. Insert upper shaft into the lower shaft and lock pin button into place.
1.Attach the outlet end of an extension cord to the plug on the rear of the grass trimmer.
NOTE:
Use only approved outdoor extension cords.
Never adjust the upper handle while the power head is running. Failure
to stop the motor may cause serious personal injury
NOTE:
If the button does not release completely in the positioning hole, the shafts are not locked
into place. Slightly rotate from side to side until the button is locked into place.
WARNING
12
Fig. 4 Fig. 5
Fig. 6