LawnMaster GT1238, Руководство оператора

Страница: 16 / 22

Your grass trimmer has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
MAINTENANCE
• Regularly clean the ventilation slot in your grass trimmer using a soft brush or dry cloth.
• Regularly clean the
trimming line and spool using a soft brush or dry cloth.
• Regularly use a blunt scraper to remove grass and dirt from the underneath of the guard.
Fitting a new spool of
trimming l
ine (See Figure 15 & Figure 16.)
• Unplug the grass trimmer
• Keep the tabs
①
depress thumb tabs and remove the spool cover
②
from the housing
③
Remove the empty.
spool
④
from the spool cover .
• Remove any dirt and grass from the spool cover and housing
• Taking the new spool and push It into the boss in the spool cover. Rotate the spool slightly until it
is seated.
• Unclip the end of one of the trimming lines and guide the line into one of the eyelets
⑤
. The line
should protrude approx. 4 inches from the spool cover.
• Unclip the end of the other trimming line and guide the line into the other eyelet. The line should
produce approx. 4 inches from the spool corner.
• Align the tabs
①
on the spool cover with the cut outs
④
in the housing.
• Push the cover onto the housing until it snaps securely into place.
Before proceeding any maintenance, switch off and unplug to tool.
WARNING
When servicing, use only identical replacement parts. Use of any other
parts may create a hazard or cause product damage.
WARNING
16
Fig.15
Fig.16
ĺ
Ļ
ĸ
Ĺ
ĺ
Ļ
ķ
ĸ
Ĺ