LawnMaster FD2401, Оригинальное руководство по эксплуатации

Страница: 6 / 16

6
GB
Symbols on the shredder
Warning! Beware of hazards. Take
special care to avoid injury or damage.
Read the manual.
The equipment is intended only for use
in premises in which the current bearing
capacity of the network is >=100 A per
phase and which are supplied by a
distribution grid with a nominal voltage
of 230V-240V.
Do not dispose of electrical equipment
in the domestic waste.
Protection against contact with the
fingers and solid foreign bodies with
Ø > 12 mm as well as protection
against splashed water from all
directions.
The product complies with the
applicable European directives and
an evaluation method of conformity
for these directives was done.
Wear ear and eye protection.
Wear hand protection.
Do not expose the unit to rain.
Caution! Switch off the motor and
disconnect from the mains before
adjustment or cleaning work, or if
the cable is caught or has been
damaged.
Warning! Danger of injury from
rotating blade .
Danger-Rotating blades.
Keep hands and feet out of openings
while machine is running.
Warning! Danger from thrown objects.
Keep your distance from the feeder and
ejection area, and keep others away
from the danger area.
Caution! Moving blade
Warning! Electric shock hazard.
Always unplug the shredder before
working on it.
Guaranteed noise power level.
Safety class II
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Training
Become familiar with the owner's manual before
attempting to operate this equipment.
Preparation
1) do not allow children to operate this equipment;
2) do not operate this equipment in the vicinity
of bystanders;
3) wear ear protection and safety glasses at all
times while operating the machine;
4) avoid wearing clothing that is loose fitting or
that has hanging cords or ties;
5) only operate the machine in open space
(e.g. not close to a wall or other fixed object)
and on a firm, level surface;
6) do not operate the machine on a paved or
gravel surface where ejected material could
cause injury;
7) before starting the machine, check that all
screws, nuts, bolts, and other fasteners are