LAWN STAR LSPS 5850 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 23

LAWN STAR LSPS 5850 Скачать руководство пользователя страница 2

2

Thank you for purchasing the Lawn Star Petrol Chain Saw which is one of the finest and
most advanced chain saws

today’s technology can produce. Before you begin using it,

please read this manual carefully and familiarise yourself with the control and the proper
use of this product to ensure you get the best possible performance from it.

IMPORTANT INSTRUCTIONS FOR YOUR PERSONAL SAFETY

Before using the chain saw, read the operating instructions and act accordingly.

ATTENTION:

You run the risk of injury if you use the chain saw incorrectly. It is

imperative that you read these Operating Instructions and follow the instructions given.

A) General safety instructions



Do not allow children less than 18 years of age, nor anyone who is not familiar with

these instructions to use the petrol chain saw.



The chain saw should be used by trained and experienced persons only.



Keep the operating instructions for future reference.



Do not operate this equipment when tired, ill, or under the influence of alcohol, drugs

or medication.



Only operate the chain saw if physically fit and alert.



Obey all safety instructions and warnings.

B) Instructions on the proper use of personal protective clothing

Working with a chain saw requires special measures with regard to protective
equipment and clothing suitable for protecting your head, hands, feet, legs, eyes and
ears.



Keep body parts away from the chain.



Wear close fitting clothing which cannot get caught in moving parts.



Always wear an approved safety helmet when felling trees and removing branches.



Always wear safety goggles and/or a face guard.



Always

wear suitable heavy-duty protective gloves.



Wear ear protection to avoid damage to your hearing.



Wear safety clothing including sturdy, non-slip footwear.



Wear leg guards.

C) Instructions on the safe use of the chain saw

ATTENTION:

Read the operating instructions carefully and familiarise yourself in the

correct use of the chain saw before using it for the first time.



Before storage allow the engine to cool. When not in use, store the chain saw in a

dry and locked place, out of reach of children.



Use only genuine Lawn Star (Pty) Ltd. replacement parts when servicing or repairing

the unit. These parts are available from your supplying dealer or service agent.



Repairs may only be performed by authorised service agents.



Avoid dangerous environments. Do not use the unit in poor light or in damp or wet

locations. Do not use in the rain. Do not over-reach. Ensure good footing and balance
are maintained.



Inspect your petrol chain saw before each operation. Pay special attention to the

chain-bar and chain. If any part is damaged or worn, repair or replace before
operation.



Always hold the chain saw firmly with both hands while working with it.



No other person may be within the working range of the chain saw.

«
1
2
3
4
...
»

Содержание LSPS 5850
























Отзывы:

Нет отзывов