6
Safety and Instruction Decals
Safety decals and instructions are easily visible to the operator and are located near any
area of potential danger. Replace any decal that is damaged or lost.
By Front Height Adjuster
(Part No. 92-2914 Right)
(Part No. 92-2915 Left)
On Mower Housing
(Part No. 93-7250)
On Top of Grass Catcher Chute
(Part No. 92-2919)
(Model 10324)
On Mower Housing
(Part No. 43-8480)
On Mower Housing
(Part No. 99-6018)
Assembly
Note: Determine the left and right sides of the lawn mower by standing in the operating position.
Unfolding the Handle
WARNING
POTENTIAL HAZARD
•
Folding or unfolding the handle improperly can
pinch, stretch, or damage one or more of the
cables.
WHAT CAN HAPPEN
•
Any pinched, stretched, or damaged cable may
cause an operational failure that results in an
unsafe operating condition.
HOW TO AVOID THE HAZARD
•
Do not pinch, stretch, or damage the cables.
•
Handle the cables with care when folding or
unfolding the handle.
•
Do not use the lawn mower if one or more of
the cables are pinched, stretched, or damaged.
Contact your Authorized Service Dealer.
1. Loosen the handle knobs and lift the upper handle
section in an arc until the upper and lower handle
sections line up and nest together (Fig. 2).
1068
2
1
3
Figure 2
1.
Knobs
2.
Upper handle section
3.
Lower handle section
2. Tighten the knobs securely.
3. Rotate the handle toward the rear of the lawn mower
until it snaps into the stops in the handle brackets.
Note: The traction cable may disconnect during shipping
and prevent the lawn mower from self-propelling
(self-propel models only). If the traction cable is
disconnected, connect it (refer to Figure 16).
