Lawn-Boy 10739, Руководство оператора

Страница: 4 / 16

3. Install the handle knobs and tighten them firmly by
hand.
2
Installing the Recoil-Starter
Rope in the Rope Guide
No Parts Required
Procedure
Important:
To start the engine safely and easily
whenever you use the machine, install the recoil-starter
rope in the rope guide.
Hold the blade-control bar to the upper handle and pull the
recoil-starter rope through the rope guide on the handle
(
Figure 4 ).
Figure 4
1. Recoil-starter rope 2. Rope guide
3
Filling the Engine with Oil
No Parts Required
Procedure
Important:
Your machine does not come with oil in
the engine. Before starting the engine, fill the engine
with oil.
1. Move the machine to a level surface.
2. Remove the dipstick ( Figure 5 ) and pour about 3/4 of
the crankcase capacity of oil into the oil-fill tube.
Note:
Max. fill: 0.53 L (18 oz), type: 10W-30 or SAE
30 detergent oil with an API service classification of
SJ or higher.
Figure 5
3. Wipe off the dipstick with a clean cloth.
4. Insert the dipstick into the oil-fill tube, but do not
screw it in.
5. Remove the dipstick and read the oil level on the
dipstick (
Figure 5 ).
•
If the oil level is low, add a small amount of oil
slowly to the oil-fill tube, and then repeat steps
3 through 5 until the oil level on the dipstick is
correct.
•
If the oil level is high, drain the excess oil until the
oil level on the dipstick is correct. To drain the
excess oil, refer to
Changing the Engine Oil (page
12) .
Important:
If the oil level in the crankcase is
too low or too high and you run the engine,
you may damage the engine.
6. Install the dipstick securely.
Important:
Check the engine-oil level before each
use and add oil as needed. Refer to Checking the
Engine-Oil Level (page 6) .
4
Assembling the Grass Bag
No Parts Required
Procedure
1. Slip the grass bag over the frame as shown in Figure 6 .
4