Lawn-Boy 10739, Руководство оператора

Страница: 10 / 16

After Operation
After Operating Safety
General Safety
•
Clean grass and debris from the machine to help prevent
fires. Clean up oil or fuel spills.
•
Allow the engine to cool before storing the machine in
any enclosure.
•
Never store the machine or fuel container where there is
an open flame, spark, or pilot light, such as on a water
heater or on other appliances.
Hauling Safety
•
Use care when loading or unloading the machine into a
trailer or truck.
• Use full-width ramps for loading the machine into a
trailer or truck. Do not exceed a 15° angle between the
ramp and the trailer or truck.
•
Tie the machine down securely using straps, chains, cable,
or ropes. Both front and rear straps should be directed
down and outward from the machine.
Cleaning the under the
Machine
Service Interval: After each use
WARNING
The machine may dislodge material from under the
machine.
• Wear eye protection.
• Stay in the operating position (behind the
handle).
• Do not allow bystanders in the area.
1. With the engine running on a flat paved surface, spray a
stream of water in front of the
right rear wheel ( Figure
17 ).
The water will splash into the path of the blade,
cleaning out the clippings.
Figure 17
2. When no more clippings come out, stop the water and
move the machine to a dry area.
3. Run the engine for a few minutes to dry the underside
of the machine to prevent it from rusting.
Folding the Handle
1. Loosen the handle knobs until you can move the
handle freely (
Figure 18 ).
Figure 18
1. Handle knob (2)
2. Move the handle forward as shown in Figure 18 .
10