Lawn-Boy 10738, Руководство оператора

Страница: 6 / 20

Setup
Important:
Remove and discard the protective plastic
sheet that covers the engine.
Unfolding the Handle
WARNING
Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an Authorized
Service Dealer.
1. Remove the handle knobs from the machine housing
(Figure 3).
Important:
Route the cables to the outside of the
handle as you install the handle.
Figure 3
1. Handle knob (2)
2. Move the handle to the operating position (Figure 3).
3. Install the handle knobs and tighten them firmly by
hand.
Installing the Recoil-starter
Rope in the Rope Guide
Important:
To start the engine safely and easily
whenever you use the machine, install the recoil-starter
rope in the rope guide.
Hold the blade-control bar to the upper handle and pull the
recoil-starter rope through the rope guide on the handle
(Figure 4).
Figure 4
1. Recoil-starter rope 2. Rope guide
Filling the Engine with Oil
Important:
Your machine does not come with oil in
the engine. Before starting the engine, fill the engine
with oil.
1. Move the machine to a level surface.
2. Remove the dipstick (Figure 5) and pour about 3/4 of
the crankcase capacity of oil into the oil-fill tube.
Note:
Max. fill: 0.59 L (20 oz), type: 10W-30 or SAE
30 detergent oil with an API service classification of
SJ or higher.
6