Lawn-Boy 10738, Руководство оператора

Страница: 8 / 20

Operation
Attachments/Accessories
A selection of Lawn-Boy approved attachments and
accessories is available for use with the machine to enhance
and expand its capabilities. Contact your Authorized Service
Dealer or Distributor or go to www.Lawn-Boy.com for a list
of all approved attachments and accessories.
Filling the Fuel Tank
DANGER
Gasoline is extremely flammable and explosive. A
fire or explosion from gasoline can burn you and
others.
• To prevent a static charge from igniting the
gasoline, place the container and/or machine
directly on the ground before filling, not in a
vehicle or on an object.
• Fill the tank outdoors when the engine is cold.
Wipe up spills.
• Do not handle gasoline when smoking or around
an open flame or sparks.
• Store gasoline in an approved fuel container, out
of the reach of children.
•
For best results, use only clean, fresh (less than 30 days
old), unleaded gasoline with an octane rating of 87 or
higher ((R+M)/2 rating method).
•
Oxygenated fuel with up to 10% ethanol or 15% MTBE
by volume is acceptable.
•
Ethanol: Gasoline with up to 10% ethanol (gasohol)
or 15% MTBE (methyl tertiary butyl ether) by volume
is acceptable. Ethanol and MTBE are not the same.
Gasoline with 15% ethanol (E15) by volume is not
approved for use.
Never use gasoline that contains
more than 10% ethanol by volume , such as E15
(contains 15% ethanol), E20 (contains 20% ethanol), or
E85 (contains up to 85% ethanol). Using unapproved
gasoline may cause performance problems and/or engine
damage which may not be covered under warranty.
•
Do not use gasoline containing methanol.
•
Do not store fuel either in the fuel tank or in fuel
containers over the winter unless a fuel stabilizer is used.
•
Do not add oil to gasoline.
Important:
To reduce starting problems, add fuel
stabilizer to the fuel all season, mixing it with gasoline
less than 30 days old.
Figure 7
Checking the Engine-oil Level
Service Interval: Before each use or daily
Max. fill: 0.59 L (20 oz), type: 10W-30 or SAE 30 detergent
oil with an API service classification of SJ or higher.
1. Move the machine to a level surface.
2. Remove the dipstick (Figure 8).
Figure 8
3. Wipe off the dipstick end with a clean cloth.
4. Insert the dipstick into the oil-fill tube.
5. Remove the dipstick and read the oil level; refer to
Figure 8.
•
If the oil level is below the Add mark, add a small
amount of oil slowly to the oil-fill tube, and then
8