3. Basic Operation 2
D. Output to Monitor
E. Connect to PC
1. Touch Settings on the Main Menu, enter “Display”
and choose “TV” as input end.
2. Plug the RCA cable into AV-Out port and connect
the other end to the monitor to output the image.
F. Charging
1. Connect two ends of the USB cable to PC and
PV-1000Touch
2. “USB Mode” notification appears to indicate
PV-1000Touch is properly connected to PC.
1. When the power goes down, battery bar on the interface goes down. Please charge the DVR immediately.
Before the device shuts down, red LED will blink for 3 seconds and shows a notification “Battery Very Low.”
2. Connect the DVR with the power supply via DC5V 3A Charger, red LED will illustrate to show the DVR is charging.
