1
MODEL MP10
The LavryBlack MP10 features:
Ultra-low noise and distortion for transparent sound
Precise matching of channels ideal for stereo recording
High-Low impedance switch to match inputs to Ribbon or Condenser and Dynamic Mic’s
Individually controllable Phantom Power for each channel.
Large wide-range meter -42 to 0 dB
Gain adjustable in 1 dB steps from 20-75 dB
High gain for low output Ribbon microphones
Gain adjustment by digitally controlled analog circuitry for sonic purity
Balanced or unbalanced outputs
CONNECTIONS (Rear Panel)
MICROPHONE INPUTS:
Connect microphones with XLR cables to the Microphone inputs. There is a “hi z/lo z” switch
located between the two input connectors. This allows the input impedance of both channels to
be matched to the type of microphones being used. For example- “lo z” would be used for
Dynamic and Condenser microphones and “hi z” would be used for Ribbon Mic’s. The inputs are
a transformer-free electronically balanced design for accurate and extended bass response with
excellent rejection of unwanted hum and noise.
ANALOG OUTPUTS:
The transformer-free electronically balanced outputs are capable of +24dBu peak level or +18dBu
when set for unbalanced operation. Connect the outputs to balanced inputs using XLR cables.
For unbalanced inputs, use either adapters or adapter cables and set the “unbal/bal” switch to
“Unbal.” The output will be unbalanced “Pin 2 Hot” when the switch is in the “unbal” position.
AC POWER:
The MP10 automatically adjusts to AC power inputs in the range of 90 to 264 Volts AC and line
frequencies between 47 and 63 Hertz. There are no settings to change.
Содержание MP10
Страница 2: ......
