Lavorwash WT20X, Руководство пользователя

Страница: 12 / 76

•
Check that voltage indicated on the rating
plate is the same as the supply voltage.
•
These machines are not suitable for vacuu-
ming health endangering dusts or inflamma-
ble/explosive substances (like ash and soot).
• Never leave the equipment unattended
whilst in use.
• Never carry out any maintenance on the
machine without first disconnecting from the
mains supply or when it is left unattended or
reachable by children or disables..
• The power cord should not be used to pull or
lift the machine.
• The machine should never be immersed and
never use water jet against the appliance to cle-
an it.
•
When using the machine in wet rooms
(e.g. in the bathroom) only connect it to so-
ckets which are connected in series with a
ground fault circuit interrupter. In case of
doubt, consult an electrician.
•
Periodically examine the power cord and
machine for damage. If any damage is found,
do not use the appliance but contact your
service centre for repair.
•
If the supply cord is damaged, it must
be replaced by the manufacturer, its service
centres or similarly qualified people in order
to avoid a hazard.
• If an extension cord is used, the plug and so-
cket must be of watertight construction.
• Before vacuuming liquids, check the float
functions correctly. When vacuuming liquids,
and when the tank is full, a float closes the suc-
tion opening, and the vacuum operation is inter-
rupted. Then switch off the machine, disconnect
the plug and empty the tank. Regularly clean the
water level limiting device (float) and examine it
for signs of damages.
• If the machine overturns, it would be recom-
mended to stand it up before switching off.
• If foam or liquid escape from the appliance,
switch off immediately..
•
The equipment should not be used to va-
cuum water from containers lavatories, tubs,
etc.
• Aggressive solvents or detergents should
not be used.
• Service and repairs must be carried out by quali-
fied personnel only. Only use manufacturer ori-
ginal spare parts for service repair.
• The manufacturer cannot be held responsible
for any damage/injury caused to persons, ani-
mals or property caused by misuse of the ap-
pliance,
USE
• Be sure that switch is in off position (0) OFF and
connect the machine to a suitable socket.
• The machine must be always kept on horizontal
bases, in a safe and stable way.
• Insert the suitable filters for the proper use. See
fig. (H)(L)(M)(N)(P).
•
Never use the appliance without filters .
• Use the most suitable accessories for the reque-
sted usage (E)(F).
• Put switch on (|) ON position in order to start the
machine.
• When job is over, switch off (0) OFF and keep
away the plug from the socket.
• If the appliance is used with especially fine dust
(size below 0.3 µm) the filter supplied will requi-
re cleaning more frequently. For especially de-
manding applications, the use of specific filters
supplied as an optional (Hepa) may be necessa-
ry.
Outlet Models
see fig. (G)
To activate the socket-electric tool function, put
switch (4) on (|)ON and switch (5) on (0) OFF.
When a tool is connected the vacuum will
automatically start as the tool is started. The
suction hose will suck directly dust and wood
shavings.
•
Even when switches (4) and (5) are (|) ON , the
electric tool socket is live. Not suitable for any
hot items.
CARE AND MAINTENANCE
see fig. (Q)(R)
The unit is maintenance-free.
•
The machine shall be disconnected from its
power source, by removing the plug from the
socket-outlet, during cleaning or maintenance
• Clean the exterior part of the machine with a
dry cloth.
• Move the appliance only by catching the
carrying handle located on the motor head.
• Store the appliance and the accessories in a dry
safe place, out of the reach of children.
FILTER CLEANING
(see fig.
(Q)
)
• The machine shall be disconnected from its power
source, by removing the plug from the socket-
outlet, during cleaning or maintenance
12