does not start again, take the product to the
nearest After Sales Service Point
>
45"#*-*5:
E
8"3/*/(
The machine must be always kept
on horizontal bases, in a safe and stable way.
>
8"5&34611-:
Water supply collection
Water supply from the water main
· Connect a supply hose (not included) to the
water inlet of the unit and to the water supply.
· Open the water supply.
8"3/*/(
(symbol) machine not suitable
for connection to the potable water mains.
The cleaner can only be connected to the water
mains if the water mains is separated by a backflow
preventer. Make sure that the hose is at least Ø
13mm-1/2 inch and that it is reinforced.
E
8"3/*/(
:
Water that has flown through
backflow preventers is considered to be
nonpotable.
IMPORTANT:
Only clean or filtered water
should be used for intake. The delivery of
the water intake tap should be equal to the
double of the maximum pump range.
- Minimum delivery rate: 16 l/min.
-
Maximum intake water temperature: 40°C
- Max inlet water pressure: 1Mpa
Place the cleaner as close to the water supply system
as possible.
Water supply from an open container
· Unscrew the coupling part for the water inlet.
· Screw the suction hose with filter (not included)
onto the water connection of the unit.
· Hang the filter in the container.
· Vent the unit before operation.
· Unscrew the high-pressure line at the high-
pressure outlet of the unit.
· Switch on the unit and let it run until water
free of bubbles emerges at the high-pressure
outlet.
·
Switch off the unit and screw on the high-
pressure hose again.
Failure to comply with the above conditions causes
serious mechanical damage to the pump and the
loss of warranty cover.
> ELECTRICITY SUPPLY
- The appliance’s electrical connection must
comply with the IEC 60364-1 standard.
IMPORTANT:
Before
connecting
the
appliance, make sure that the nameplate
data are the same as those of the electrical
mains and that the socket is protected by a
differential security breaker with tripping
sensitivity below 0.03 A - 30 ms.
- If the appliance’s plug is not compatible with
the socket, have the socket replaced with
another of suitable type by professionally
qualified staff.
- Never use the appliance in ambient
temperatures below 0° C if it is equipped
with a PVC (H VV-F) cable.
E
9:8"3/*/(
Inadequate extension cords
can be dangerous.
E
9+8"3/*/(
If an extension cord is used,
the plug and socket must be of watertight
construction.
Information for supply may also be obtained
from the plug manufacturer.
230-240V
400-415V
3G 2,5 mm2
4G 2,5 mm2
max 20 m
max 30 m
USAGE
> UNPACKING
>
"44&.#-:*/4536$5*0/4
(see fig. )
>
%&4$3*15*0/0'5)&."$)*/&
(see fig. )
EN
18
