Lavorwash Lavor Pro FREE EVO 50E, Руководство пользователя

Страница: 33 / 120

33
Pb-Acid GEL Signaling Signaling ACTION
24,0 24,0 Green LED ON LED ON All working
21,5 22,5 Yellow LED ON LED ON All working
20,5 21,5 Red LED ON LED FLASHING Brush motor is not wor-
king
20,0 21,0 Red LED
FLASHING
LED FLASHING Brush and suction motors
are not working
Volts
Battery Type
Battery power
test indicator
LED
Brush operation
indicator LED
Battery discharge indicator and functions - MODEL “B” (DC 24V)
Model “BT” (DC 24V with traction)
(
!
) TO ENTER THE BATTERY THRESHOLD CONFIGURATION MODE:
1) Press simultaneously the push buttons “REDUCE SPEED” (Photo E - 3) and “SUCTION MOTOR
SWITCH” (Photo E - 6) within 2 seconds after switching on the machine with the key switch (Photo F -
1). The second LED of the speed indicator (Photo E - 3B ) will be ON.
2) Press “INCREASE SPEED” (Photo E - 4)” key within 5 seconds from the previous action; you have now
entered in the configuration mode.
(
!
) THE CONFIGURATION SETTINGS ARE VISIBLE ON THE SPEED INDICATOR LED:
1) The first two LEDs (Photo E - 3A, 3B) indicate the type of setting of the indicator intervention thresh-
old an both must be ON;
2) The third and fourth LEDs (Photo E - 3C, 3D) indicate the battery type: for the PB-Acid battery only
the third LED (Photo E - 3C ) should be ON, while for the GEL battery both should be ON (Photo E - 3C,
3D)
(
!
) TO MODIFY CONFIGURATION SETTINGS:
1) The “INCREASE SPEED” (Photo E - 4)” and “REDUCE SPEED” (Photo E - 3) keys are used to set the
indicator’s intervention threshold in such a way that the first two speed indicators LEDs (Photo E - 3A,
3B) turn ON;
2) The “BRUSH MOTOR SWITCH” (Photo E - 5) is used to set the PB-Acid battery type while the “SUC-
TION MOTOR SWITCH” (Photo E - 6) is used to set the GEL battery type
(
!
) TO SAVE THE SETTINGS AND EXIT THE MODE:
Press the “REDUCE SPEED” (Photo E - 3) switch and the “SUCTION MOTOR SWITCH” (Photo E - 6) si-
multaneously.
Once the settings have been set, we have different battery discharge levels with differentiated inter-
vention on the machine functions as specified in the following table: