Lavorwash GV Vesuvio 10, Инструкция пользователя

Страница: 19 / 88

- a warning label prohibiting personnel
from using water to put out fires on
electrical equipment;
- a warning label obligating the
operator to check the efficiency of the
safety protection measures before
starting up the machine;
- a warning label relative to the danger
of the tank under pressure;
- a warning label relative to the danger
of heat - steam emissions;
WARNING Danger from hot steam.
WARNING Danger of scalding
Technical features of the machine
TECHNICAL FEATURES OF THE STEAM GENERATOR
PARAMETER DESCRIPTION
Resistors KW (see thecnical data
plate)
Supply voltage
V
voltage command buttons V 12
Resonant level dB 72
Steam pressure bar 10
gross weight Kg 140
net weight Kg 112
Overall dimensions cm L53 x P115 x H90
Packaging sizes cm L77 x P130 x H112
High mm 900
NOTE: The data label plate shows main
technical data, CE markings and
manufacturer name /address; the label is
applied on machine cover.
Allowed and forbidden use
The electric steam generator for industrial cleaning
is used for the cleaning and disinfecting of any
object in an easy and ecological way, also in the
most difficult points with or without detergents.
Any use of the machine other than the one it has
been built for represents an anomalous condition,
can cause serious damages to the operating means
and entail a serious risk for the operator using it.
- The machine has not been built to work in a
place with deflagration risks. It is therefore
absolutely forbidden to use the machine in an
atmosphere with explosion risks.
- For any forbidden use of the machine, the User
must contact the Builder about any possible
counterindications or dangers deriving from
the machine misuse.
- For any modification to be made to the
machine once it has left its building site, the
User must contact the Builder about any risks
the modifications could entail and about their
compliance with the Legislation in force.
Machine handling and transport
The machine is usually packed in cartons on pallets
when delivered.
While unpacking it, check that the machine is unda-
maged and that it corresponds to the ordered one.
Make sure that this operating handbook is included,
that no loosen parts have been forgotten in the pa-
cking and check that the machine has not been da-
maged during transportation.
In case of damages, immediately contact both the
forwarding agent and the Builder.
Never leave the packing components (cardboard,
wood, staples, plastic bags, polyethylene sheets,
etc..) in the environment. They must be collected
and delivered to competent organs.
The packed machine can be lifted by means of a
forklift truck or a crane.
This entails the presence of two skilled operators,
EN
19