Laversab 6300-M4 Скачать руководство пользователя | Manualshive

Страница: 29 / 64

background image

22

Each time the cursor is moved right, the displayed units will scroll left. When the cursor is
moved to the last selection, line 4 will look like this:

Pt units : …. Qcmbar, Mph, Kmph, EPR.

Select the desired units by moving the cursor to the unit of choice and then press ENTER.  The
new units will be displayed on the screen and will blink.  Also, the actual and target values
will  get  converted  into  the  new  units  and  the  target  value  will  blink.  This  is  shown  in  the
sample screen below where the units of Mach have been selected.

Units: Mach Feet/min

Feet

Actual: M 0.136

3500

1005 M

Target:

0.064

3000

0

The unit selection will not become effective until the GO key is pressed. The 6300-M4 will
return to the old units if the CANCEL key is pressed. .

Static Units:

There are four Ps units to choose from: Feet, Ps inHg (Psin), meters, and

mbar (Psmb).  When a particular unit is selected, the units for climb automatically changes to
selected units/minute.  Any of these units can be selected by pressing the Ps Units key.  Line 4
of the display will show all four units, with the cursor under  “Feet”. . The arrow keys can be
used to move the cursor.  The UP ARROW key moves the cursor left, the DOWN ARROW
key moves the cursor right.  The sample screen below shows the different Ps units, with the
cursor under  “Feet”.

Units: knots Feet/min

Feet

Actual: M 101.2

3500

1005 M

Target:

20.0

3000

0

Ps units : Feet, Psin, mtrs, Psmb

Select the desired units by moving the cursor to the unit of choice and then press ENTER.  The
new units will be displayed on the screen and will blink.  Also, the actual and target values,
both  for  Static  and  Climb  will  get  converted  into  the  new  units  and  the  target  values  will
blink.  This  is  shown  in  the  sample  screen  below  where  the  units  of  “PsinHg”  have  been
selected.

Units: knots PsinHg/min PsinHg
Actual: M 101.2

8.345

28.986 M

Target:

20.0

10.000 29.054

«
...
27
28
29
30
31
...
»

Содержание 6300-M4

































































Отзывы:

Нет отзывов

Похожие инструкции для 6300-M4

Бренд: Walchem Страницы: 10

Бренд: LAS Страницы: 6

Бренд: fadini Страницы: 28

Бренд: GEA Страницы: 47

Бренд: brel-motors Страницы: 2

Бренд: iluminize Страницы: 2

Бренд: Lab.gruppen Страницы: 2

Бренд: IBA Страницы: 29

TITAN-TRACKSIDE-3

Бренд: Remote Control Systems Страницы: 4

Бренд: Jeckson Electric Страницы: 2

Бренд: Vageo Страницы: 2

Бренд: DirectConnect Страницы: 2

CS ME-02 Series

Бренд: pizzato Страницы: 12

Бренд: Danfoss Страницы: 14

Бренд: MAKOT Страницы: 6

DuplicAir Intelligent Control Blue

Бренд: Jydepejsen Страницы: 52

Бренд: Quick Страницы: 16

Бренд: KELD Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды