Laverda M300, Руководство оператора

Страница: 40 / 41

• If the machine tends to tilt forward when
working on slopes, lower the cutting table
completely.
• Take turns and descents at moderate speeds
(3–4 Km/h).
Halve the speed when the grain tank is full.
• During harvesting operations, always use the
leveling system, if fitted.
Fig. 7
GUID-83C2B990-5D4E-4098-B562-A7E5BBE62596-high.jpg [High]
DANGER:
Risk of squeezing, cutting or getting trapped.
• If any moving part becomes blocked or jammed, release it only when the engine is switched off and all
drives have come to a complete stop. Never push the crop into the main crop elevator using hands, feet
or any other means. This may cause severe injury or death.
• Never enter the grain tank unless the engine has been switched off and the ignition key has been
removed from the instrument panel.
DANGER:
Risk of breathing in dust.
• Threshing dust may cause allergic lung diseases. The dust may also contain residues of pesticides
injurious to health. Keep the cab doors shut when threshing. Wear a protection mask when carrying out
service work involving exposure to dust (cab filters, rotary screen etc.) and when working with
compressed air.
• Keep a fire extinguisher within easy reach. Check the extinguisher at the intervals prescribed by national
law. Replace or recharge it whenever it has been used, even if only partially. The type of extinguisher
approved for Europe contains 6 kg of extinguishing agent and belongs to fire class ABC. We
recommend checking the dimensions of a potential new extinguisher to ensure that it can be stored
underneath the operator’s seat (see the paragraph
Safety devices
).
2. Safety
40 Combines
M300-M310_EN_327305015