LAVAZZA Magystra LB 2600 AUS, Руководство по установке и обслуживанию

Страница: 37 / 44

37
EN
MAINTENANCE AND CLEANING
OUT OF ORDER
If the vending machine should be inactive for a long
period, please act as follows:
Perform the uninstall cycle (see. Para. “PROGRAM-
MING MISCELLANEOUS”).
Detach the water and energy supply.
Empty and clean the used coffe capsule drawer, drip
tray and water tank.
Empty and clean the product canisters.
Empty and clean the coffe capsule group.
Clean the internal and external surfaces by using a
wet piece of cloth.
Cover the machine by means of a cloth.
Store it in a sheltered place, at a temperature not
below 5 °C, at a relative humidity not above 80%.
If you should definitively set the vending machine
out of commission and provide for the disposal of
some parts there of, after having carried out the op-
erations above, disassemble the vending machine
by separating every single component and subdi-
viding the parts according to the nature of materi-
als.
CLEANING INNER SIDE OF THE MACHINE
Remove any trace of residuals from the internal surfac-
es of the machine, specially near the glass station and
clean with a damp cloth.
Dry the parts carefully and re-mount them on the
machine.
Re-connect the supply cable and power on the main
switch
.
Fit the service key into the door switch to power the sys-
tem.
The vending machine is supplied and running to
all effects . The mobile parts of the coffee brewer
will be handled . Act extremely carefully .
Perform some wash cycles of the hydraulic machine
circuits
.
Remove the service key, put it into its housing, close
the door
.
CLEANING EXTERNAL BODY
Clean outside the machine by using a piece of
non-abrasive cloth, dampened with lukewarm water.
Use a neutral, non-foamy detergent, only if neces-
sary.
Use neutral detergent products only . Never use
abrasive cloths, steel sponges, aggressive or
foamy detergents and other solvents, hot water
and acids .