6.2.2. Dispensing steam
To dispense steam, turn the tap knob (8) anticlockwise:
the steam coming out from the steam pipe (9) will be
proportional to the opening of the tap.
Attention
Before using the steam to warm drinks or froth the
milk, it is necessary to dispense steam to comple-
tely discharge the condensation.
Attention
Handle the steam pipe carefully using the rubber
piece (10) and do not touch the hot water pipe be-
cause they are components which can reach high
temperatures.
6.3. Autosteamer
6.3.1. Heating milk
Immerse the autosteamer ends in the milk to be heated.
Press the hot milk key (3).
Wait for steam dispensing to be completed.
Press the hot milk key (3) again to stop milk heating in
advance.
When the set temperature is reached, it is possible to
enable steam dispensing again by keeping the hot milk
key (3) pressed.
Attention
The autosteamer ensures accuracy of ± 3°C on milk
temperature between set and actual temperature
only if the temperature of milk used is 4°C.
6.3.2. Heating and frothing milk
Since steam dispensing stops automatically when the
set milk temperature is reached, to prevent froth from
flowing out, milk volume must not exceed 1/3 of jug ca-
pacity.
Immerse the autosteamer ends in the milk to be heated.
Press the frothed hot milk key (2).
Wait for steam dispensing to be completed.
Press the key (2) again to stop milk heating and frothing
in advance.
Maintenance manual for technical assistance
13
Manual code 10066846 / Rel. 0.00 / March 2012
B
A
8
10
9
3