LAVAZZA LB 4712 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 31

LAVAZZA LB 4712 Скачать руководство пользователя страница 13

5. INSTALLATION AND START UP

5.1. Unpacking

open the packaging, taking care not to damage it. Re-
move the machine protections and the equipment con-
tained in the package. Take the machine out..

Environment

Components of the packing must be separated ac-
cording to the materials with which they are com-
posed and disposed of according to the waste
collection and disposal regulation in force.

5.2. Positioning

For a correct ergonomic use of the machine, place it on
a stable and perfectly horizontal surface, away from
water source, flames and heat. The area should be suf-
ficiently illuminated, ventilated, hygienic, not corrosive
and/or explosive and equipped with a power outlet rea-
dily reached with the supplied power cord. also make
sure that the place where the machine is installed has di-
mensions and sturdiness suitable to safely support it.

For the correct operation of the machine the following
advice is given:

- room temperature: 5°c ÷ 40°c;
- maximum humidity: 95%;

Warning

The machine is not suitable for outdoor installation,
and should not be exposed to weather.

Warning

The presence of magnetic fields or proximity of elec-
tric machines which generate disturbances, may
cause malfunctions in the electronic control of the
machine.

Warning

With temperatures approaching 0°C there is the risk
of freezing internal parts of the machine which con-
tain water. Do not use the machine under these con-
ditions.

Attention

Sufficient space must be allowed to access the ma-
chine and the plug, to allow the user to move freely
and to be able to immediately leave the area in an
emergency.

Prepare a support base that is suitable to support its
weight (1); It is important that all the terminal connec-
tions to the water (2) and electrical mains (7) are easily
reachable and, in any case, close to the machine.
Make sure that there is enough space to install and cor-
rectly use the machine.
It is recommended to equip the working base of the ma-
chine with a drawer (12) to collect the used coffee cap-
sules.

Attention

For correct operation, the machine must rest on a
perfectly horizontal surface. Any alignment adju-
stments of the machine must be done by adjusting
feet (5).

Maintenance manual for technical assistance

9

Manual code 10066846 / Rel. 0.00 / March 2012

5

7

8

9

6

4

3

2

1

11

12

10

«
...
11
12
13
14
15
...
»

Содержание LB 4712
































Отзывы:

Нет отзывов