Repeat this operation for the other dose keys.
To exit the programming mode, press the SToP/PRoG
key (6) or wait 30 seconds.
When the programming is completed, place the pro-
gramming lever (1) to the oFF position.
Warning
Each dose should be programmed using a new cap-
sule and not one previously used.
The maximum programmed time period is 120 se-
conds.
Note
Programming the doses of the left-hand keyboard
first, the machine automatically programs the doses
of the right-hand keyboard. It is however possible
and advisable to program the keyboards separately,
taking care to always start from the left-hand key-
board.
6.1.2. Programming autosteamer hot milk tempera-
ture
Put the programming lever (1), situated under the ma-
chine boiler cover, to the on position.
Turn the machine on, keeping the key (3) pressed for at
least 3 seconds.
The leds of the keys (2) and (3) light up to confirm the
set temperature.
The key (2) indicates the tens and the key (3) indicates
the units.
To increase or decrease the temperature of 1°c use the
keys (2) and (3) respectively.
To confirm the new set value, pres the SToP/PRoG (6)
key for at least 3 seconds.
6.1.3. Programming autosteamer hot frothed milk
temperature
Switch the machine on keeping the key (2) pressed for
at least 3 seconds.
Proceed as indicated in section 6.1.2.
6.1.4. Loading of default data
Put the programming lever (1), situated under the ma-
chine boiler cover, to the on position.
Turn the machine on, keeping keys (4), (5) and (6) pres-
sed for at least 5 seconds.
When the programming is completed, place the pro-
gramming lever (1) to the oFF position.
6.2. Preparing hot drinks
6.2.1. Dispensing hot water
To dispense hot water, turn the tap knob (a) anticlock-
wise: the hot water coming out from the pipe (B) will be
proportional to the opening of the tap.
Maintenance manual for technical assistance
Manual code 10066846 / Rel. 0.00 / March 2012
12
6
4
ON
1
6
2
3
6
4
5