Maintenance manual for technical assistance
Manual code 10081945 / Rel. 0.00 / February 2014
12
Loosen the screw (1).
Turn the clamp (2).
Remove the temperature probe (3).
Warning
During temperature probe (3) re-
assembly, ensure that a layer of
heat conducting paste has been
applied between the probe and
the boiler.
7.8. Disassembling the coffee brewing unit
Unscrew the screw (1) on both sides
and remove the coffee brewing unit
(2).
Remove the three circlips shown in
the figure, micro switch actuator (3)
and unscrew the four screws (4) on
both sides.
Remove the capsule support (5) and
boiler (6).
Unscrew the indicated screw and re-
move the perforator (7).
A
1
2
3
1
2
3
5
6
4
4
4
4
A
A
7
B