Technical support maintenance manual
Rel. 0.00 / June 2018
27
13.6. REMOVING THE POWER CABLE
Figure A
: undo one of the cable
clamp screws and loosen the
other.
A
Figure B
: push the power cord (
1
)
toward the inside of the machine
so that the electrical clamps (
2
)
protrude.
Undo the terminal block screws in
order to extract the caps and re-
move the power cable.
D
13.7. EXTRACTING THE DISPENSING UNIT
Warning
Wait for the boiler to cool off before performing these operations. DANGER OF BURNS.
Figure A
: cut the tie of the sole-
noid valve high pressure hose,
and then the tie of the boiler HOT
WATER OUTLET hose.
Disconnect the hoses.
Warning
Take care not to tear the hoses.
During reassembly, the ties must be replaced and tightened with the
OETIKER CLAMP PLIERS.
A
B
2
1
A
G
G
H
