11
Adding detergent/additives
Warning!
Use only detergents and additives that are suitable for use in
domestic washing machines.
1
For USA and Canada only!
Important!
Only LOW-SUDSING detergent suitable for a front-loading
washing machine can be used in this machine. This machine can heat
the water up to 95 degrees celsius, or 200 degrees fahrenheit, and care
should be taken to ensure that the correct washing powder is used. If
you have any doubt, check with your dealer or the distributor.
WARRANTY AND CONSEQUENTIAL DAMAGES ARE VOIDED IF A LOW
SUDSING DETERGENT IS NOT USED.
Dose detergent and additives according to the instructions of the de-
tergent and additive manufacturers. Follow the advice on the packag-
ing.
Dosing depends upon:
–
the washing’s degree of soiling,
–
the size of the load
–
the degree of hardness of the water supply.
•
If the manufacturer does not give instructions for small loads: for a
half load, use a third less, for a very small load, use only half of the
detergent that is recommended for a full load.
•
From water hardness 2 (= medium) upwards, water softener should
be used. Detergent can then always be dosed for water hardness 1
(= soft). Your local water company will be able to give you informa-
tion about the water hardness in your area.
1.
Pull the detergent dispenser drawer out as far as the stop.
2.
Add the detergent/additives.
3.
Push the drawer in fully.
Washing powder/tablets
for the main wash
Softeners/
wash-care products to
preserve the shape of
garments/
starch
Washing powder/tablets
for the pre-wash or in-
wash stain treatment
