LAVAMAT 5220, Информация пользователя

Страница: 18 / 36

18
What to do if...
Remedying minor malfunctions yourself
If the programme progress display shows one of the following error
messages during operation:
–
E (END) flashes 1x (problem with water inflow),
–
E (END) flashes 2x (problem with water outflow),
–
E (END) flashes 4x (door open),
please refer to the following table.
After the error has been remedied, press the
S/P (START/PAUSE) but-
ton.
For other error messages (one or more flashing indicators in the pro-
gramme progress display):
Switch the appliance off and then on again. Reset the programme.
Press the
S/P (START/PAUSE) button.
If the error is displayed again, please contact customer service.
Problem Possible cause Remedy
Washing machine does
not work.
Mains plug not plugged in
or fuse not working. Plug in mains plug. Check
fuse.
Door not closed properly.
Close door – there should be
an audible click.
S/P
(START/PAUSE) but-
ton was not pressed for long
enough.
Press
S/P
(START/PAUSE)
button for longer.
Door cannot be closed. Child safety device engaged. Release child safety device.
E
(END) display flashes
4x.
Door is not closed properly.
Close door properly. Start
programme again.
E
(END) display flashes
1x.
(Problems with water
inflow)
Tap turned off. Turn tap on.
Filter in the screw connec-
tion of the inlet hose is
blocked. Turn off the water tap. Un-
screw hose, take out filter
and clean it.
Water tap is blocked with
limescale or faulty. Check the water tap and
have it repaired if necessary.