4
System configuration follows several
steps. The first step (installing the hub's
device driver) may require the Windows
CD; subsequent steps (installing the
serial and parallel port drivers) use the
Lava Installation and Utilities diskette.
To make sure you have installed the
drivers successfully:
1. For the SPH-USB 1.1 Hub, go to ‘My
Computer,’‘Control Panel,’‘System
Properties,’‘Device Manager.’ Under
‘Universal Serial Bus Controller’ it
should show:‘Generic USB Hub’ &
‘Lava SPH-USB BAY Interface
Controller.’
2. For the serial port, go to ‘My
Computer,’‘Control Panel,’‘System
Properties,’‘Device Manager,’‘Ports
[COM & LPT].’ It should show a new
direction:‘Serial on USB [COM3].’
Configuring system software