3
Verifying that your system
supports USB
To determine if your system supports USB, follow these simple steps:
1. Insert the disk labeled ‘Lava Installation Utilities’ into drive A.
2. In the ‘Start’ menu, select ‘Run’.
3. Type a:\usbready. Follow instructions on the screen. One of two USB
System Checker dialogs will appear:
A. If your system supports USB, the dialog will read,‘This system
DOES give support to USB.’ Continue installation.
B. If your system does not support USB, the dialog will read,‘This
system DOES NOT currently support USB!’ Do not proceed with
installation.
Installing the Lava SPH-USB 1.1 Hub
Plug the flat end of the USB cable into the USB downstream A connector
located in the back of a PC or a USB hub. Plug the upstream B connector
into the Lava SPH-USB 1.1 Hub.
USB
Type A
USB
Type B