background image

           

 

eSynC Product Family 

Reference Manual

 

April 5, 2022 

Revision C03 

 

 

Abstract

 

The eSynC family of products (formally known as L) permits the charging of select 
Samsung mobile devices while simultaneously interacting with USB 2.0 accessories. 
 
The eSynC products share the core set of features present in all nSynC products, as well as 
providing “extended” features such as battery modulation, screen brightness management, and 
improved network operation. All devices supported use the USB-C interface. 

 

 

Contents 

Introduction ..................................................................................................................................... 3

 

System Requirements...................................................................................................................... 4

 

Product Features.............................................................................................................................. 6

 

USB Host Operation with Simultaneous Charging .................................................................... 6

 

USB 2.0 Ports for User Accessories ........................................................................................... 7

 

LAVA Tablet Manager (LTM) Application ............................................................................... 7

 

Battery Modulation ..................................................................................................................... 8

 

Wired Network Operation......................................................................................................... 10

 

Network Recovery Operation ................................................................................................... 11

 

Screen Brightness Management ................................................................................................ 12

 

Power Options ........................................................................................................................... 13

 

Power-over-Ethernet Support ................................................................................................... 14

 

System Watchdog Handling ..................................................................................................... 15

 

Samsung Knox Configure ......................................................................................................... 16

 

Product Versions ....................................................................................................................... 16

 

Connection Descriptions ............................................................................................................... 17

 

USB-C “Mobile Device” Data & Power Output ...................................................................... 17

 

USB-C “Power Adapter” Input ................................................................................................. 17

 

“Aux. Power Adapter” input ..................................................................................................... 18

 

Barrel Jack “9-36 VDC In” ....................................................................................................... 19

 

USB-A receptacles .................................................................................................................... 19

 

Status LEDs .............................................................................................................................. 20

 

“Ethernet” RJ45 Port and Indicators ......................................................................................... 21

 

“PoE-Ethernet” RJ45 Port and Indicators ................................................................................. 22

 

Internal Jumpers ........................................................................................................................ 22

 

Using USB Serial Ports ................................................................................................................. 23

 

Modules: eSynC-1U-OEM and eSynC-BM-OEM ....................................................................... 24

 

LAVA Tablet Manager (LTM) Configuration File ...................................................................... 26

 

Commands and Parameters ....................................................................................................... 27

 

Diagnostic Log File................................................................................................................... 31

 

Sample LTM_CFG.txt Configuration File ............................................................................... 32

 

Содержание eSynC-E





































Отзывы: