Hardware Used
2. Install wheel kit to base plate by inserting
(2) x
Bolt Ø10 ×15mm through the wheel kit
and base plate and securing them with (2) x
Nut M8 (use supplied wrench to tighten).
Top View
OO
Wrench
Qty. 1
EE
Bolt Ø10 ×15mm
Qty. 2
HH
Nut M8
Qty. 2
6
ASSEMBLY INSTRUCTIONS
Hardware Used
MM
MM
D
x 4
x 1
PP
Philips
screwdriver
Screw Ø8×10 mm
2
1
1.You will need to remove at least one of the
three protective steel guards (D) in order to
safely remove the bubble rap and foam
material from the boroscilate glass tube
located in the center of the unit. Unscrew all
(4) of the MM
Ø8×10 mms screws
, then remove
the protective steel guard from its supports
slots. Now that you have properly and carefully
removed all transit protection materials from
the unit, you will need to place the unit back
in its original proper order.Re-Install the
protective steel guard (D) by hanging it on the
upper support slots. Next, tightly secure it with
all (4)of the MM
Ø8×10 mm screws
in to their
orginal support slots accordingly.
