![background image](http://html1.mh-extra.com/html/launch/x-431-adas-pro/x-431-adas-pro_user-manual_3875622048.webp)
X-431 ADAS PRO Calibration Tool User Manual
44
Proceed as follows to place the ADAS calibration panel centred in front of the vehicle:
1. Attach one wheel clamp on the left rear wheel.
*Note: You are strongly recommended to install the wheel clamp on the rear wheel since
the farther distance (between the calibration panel and wheel clamp) makes the
calibration more accurate.
2. Align the scales of the wheel clamp at a right angle. Ensure that the level gauge
bubbles of both wheel clamps are centred.
3. Switch on the laser beam of the laser module with the switch.
*Caution: Laser radiation may cause damage to/destruction of the retina. Never look
directly into the laser beam.
4. Align the laser module by setting a desired height on the scale of the cross member.
*Tips: If the laser beam of the wheel clamp positions at a greater value on the cross
member, slightly push the calibration frame rightwards.
Fig. 5-5
5. Perform steps 3-4 for the second laser module of wheel clamp.
6. By moving the calibration frame laterally, place the panel in a way that the left
and right scale of the cross member projected from the wheel clamp laser
show the same values.
Now the calibration panel is placed centred in front of the vehicle.
Содержание X-431 ADAS PRO
Страница 4: ......