background image

                                                                    X-431 ADAS PRO Calibration Tool User Manual 

Copyright Information 

Copyright  ©  2019  by  LAUNCH  TECH.  CO.,  LTD.  All  rights  reserved.  No  part  of  this 

publication may be reproduced, stored in a retrieval system, or transmitted in any form 

or by any means, electronic, mechanical, photocopying, recording or otherwise, without 

the prior written permission of LAUNCH.   

Neither  LAUNCH  nor  its  affiliates  shall  be  liable  to  the  purchaser  of  this  unit  or  third 

parties for damages, losses, costs, or expenses incurred by purchaser or third parties 

as  a  result  of:  Accident,  misuse,  or  abuse  of  this  unit,  or  unauthorized  modifications, 

repairs, or alterations to this unit, or failure to strictly comply with LAUNCH operating 

and  maintenance  instructions.  LAUNCH  shall  not  be  liable  for  any  damages  or 

problems arising from the use of any options or any consumable products other than 

those  designated  as  Original  LAUNCH  Products  or  LAUNCH  Approved  Products  by 

LAUNCH. 

All  information,  specifications  and  illustrations  in  this  manual  are  based  on  the  latest 

information  available  at  the  time  of  printing.  LAUNCH  reserves  the  right  to  make 

changes at any time without prior written or oral notice. 

Trademark Information 

LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (LAUNCH) in China 

and  other  countries.  All  other  LAUNCH  trademarks,  service  marks,  domain  names, 

logos, and company names referred to in this manual are either trademarks, registered 

trademarks, service marks, domain names, logos, company names of or are otherwise 

the  property  of  LAUNCH  or  its  affiliates.  In  countries  where  any  of  the  LAUNCH 

trademarks,  service  marks,  domain  names,  logos  and  company  names  are  not 

registered,  LAUNCH  claims  other  rights  associated  with  unregistered  trademarks, 

service  marks,  domain  names,  logos,  and  company  names.  Other  products  or 

company  names  referred  to  in  this  manual  may  be  trademarks  of  their  respective 

owners.  You  may  not  use  any  trademark,  service  mark,  domain  name,  logo,  or 

company name of LAUNCH or any third party without permission from the owner of the 

applicable trademark, service mark, domain name, logo, or company name. You may 

contact LAUNCH by visiting the website at www.cnlaunch.com, or writing to LAUNCH 

TECH.  CO.,  LTD.,  Launch  Industrial  Park,  North  of  Wuhe  Avenue,  Banxuegang, 

Bantian,  Longgang, Shenzhen,  Guangdong,  P.R.China,  to request written permission 

to use Materials on this manual for purposes or for all other questions relating to this 

manual. 

 

Содержание X-431 ADAS PRO

































































Отзывы: