Launch VALUE-100, Руководство пользователя

Страница: 26 / 50

LAUNCH VALUE-100 A/C Service Station User’s Manual
users to avoid dispersing the R134a refrigerant fluid utilized in the
machine since it is a substance that contributes to raising the
temperature of the planet, with a global warming potential(GWP) of
1300.
PRINCIPLES F PERATIN
In a single series of operations, the machine permits recovering
and recycling refrigerant fluids with no risk of releasing the fluids into
the environment, and also permits purging the A/C system of
humidity and deposits contained in the oil. The machine is equipped
with a built-in evaporator/separator that removes oil and other
impurities from the refrigerant fluid recovered from the A/C system
and collects them in a container for that purpose. The fluid is then
filtered and returned perfectly recycled to the bottle installed on the
MACHINE.. The machine also permits running certain operational
and seal tests on the A/C system.
SETUP
The machine is supplied fully assembled and tested. Referring to
Figure 2, mount the hose with the BLUE quick-connect coupling on
the male threaded connector indicated by the BLUE LOW
PRESSURE symbol and the hose with the RED quick-connect
coupling on the male threaded connector indicated by the RED HIGH
PRESSURE symbol. Referring to Figure 3, remove the protection
under the refrigerant scale as follows:
-Loosen the nut [2].
-Completely loosen the screw [1].
-Keep the screw [1], the nut [2], and the knurled washer [4] for
possible future use.
NTE: in the event that the equipment has to be transported,
the refrigerant bottle scale should be locked in place as follows:
-Procure two size 10 wrenches.
-Tighten the nut [2] almost completely onto the screw [1].
-Insert the knurled washer [4] onto the screw [1].
-Turn the screw [1] just a few times on the threaded bush [6].
-Switch the machine on.
-Tighten the screw [1] until the display signals ZERO
availability.
-Tighten the nut [2] forcefully (using the second wrench to
block the screw [1]).