Launch TLT235SC, Руководство пользователя

Страница: 29 / 49

TLT235
、
TLT240 Economical Two-post User’s Manual
23
Fig.13b
—
The two steel cables shall be adjusted to
certain uniform tension to ensure the two
carriages are moving synchronously.
10.2.7 Install the power unit and hydraulic lines
z Use two M10 bolts and washers to fix the power unit
(as shown in Fig. 14a
、
14b). for TLT235SC
、
TLT240SC
、
TLT235SC
（
U
）
models, install the
hydraulic line as shown in Fig. 14a , for TLT235SB
、
TLT240SB models, , install the hydraulic line as
shown in Fig. 14b and tighten all the fittings to
prevent oil leakage.
z Fill the reservoir with hydraulic oil (oil capacity of 10L).
Operate carefully to avoid dust and other pollutants
mixed with the hydraulic oil.
Note
：
‹ Clean the impurities in the hydraulic line
and remove the protective plug from the
hydraulic cylinder.
‹
When the hydraulic hose installation needs
to go through the column, ensure the
hydraulic hose won’t touch any movable
parts inside the column
‹
During the installation, rubber cushions
must be added between the hydraulic
station and the installation plate
Short screw end, double
nuts tightened
Long screw end,
adjustable
Steel cable