LAUNCH
KWB-511 Wheel Balancer user’s manual
12
Press OPT key to start
Step1
Rotate the gas nozzle to 12 o’clock.
Press ENTER key to memorize the point .Mark with a chalk a
reference mark on the tire
Step2
Remove the wheel from the balancer using a tire changer. Align
the nozzle and the mark by rotating the tire on the rim by 180
degrees.
Step3
Replace the wheel on the balancer and rotate the gas nozzle to 12
o’clock again. Press “ENTER” key to memorize
Step4
Press START key to start OPT measurement.
After measurement, mark with chalk again on the tire the marked
point indicated on the screen.
Using the changer to assemble until the
new mark
and the gas
nozzle coincide. Now the value displayed is the
rest value after
optimization
.On this point add 10g counterweight.
Press ENTER to end optimization
10. Motorcycle Mode
Motorcycle mode is the same as standard dynamic mode except that it needs special motorcycle fixtures and extending arms.
