7. Control Panel
FIGURE 1
DISPLAYS IDENTIFICATION
14
INNER side display window, indicates readings of balancing weight to be attached on In-
ner side of wheel.
15
OUTER side display window, indicates readings of balancing weight to be attached on
outer side of wheel.
13
Weight Position LEDs for INNER side- Full LEDs flash when correct weight position
is at
top-dead-center.
12
Weight Position LEDs for OUTER side- Full LEDs flash when correct weight position
is
at top-dead-center.
11
Mode display window-indicates balancing modes.
KEYPAD
-
User enters information and selects function using these keys.
5
Start Button -
Press to start a spin cycle.
4
Stop button
- Press to interrupt operating cycle.
6
FINE key
- Press to indicate weight amount reading below 5gram (0.3oz), applicable only
after
spinning stops
8