4
4.SAFETY INSTRUCTION
GENERAL SAFETY WARNINGS AND PRECAUTIONS
4.1.1 KEEP WORK AREA CLEAN AND DRY.
Cluttered, damp, or wet work are-as invite inju-
ries.
KEEP CHILDREN AWAY FROM WORK AREA.
Do not allow children to
handle this product.
STORE IDLE EQUIPMENT.
When not in use, tools and equipment should
be stored in a dry lo-
cation to inhibit rust. Always lock up tools and equipment, and keep out of reach of children.
DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCO-HOL OR DRUGS.
Read warning labels on prescriptions to determine if your
judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not attempt to use this product.
USE EYE PROTECTION.
Wear ANSI approved safety impact eyeglasses
when using this prod-
uct.
DRESS SAFELY.
Do not wear loose clothing or jewelry, as they can be-come caught in moving
parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts.
If wearing a long-sleeve shirt, roll sleeves up above elbows.
DO NOT OVERREACH.
Keep proper footing and balance at all times to
prevent tripping, falling,
back injury.
INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENT.
STAY ALERT.
Watch what you are doing at all times. Use common sense.
Do not use this prod-
uct when you are tired or distracted from the job at hand.
CHECK FOR DAMAGED PARTS.
Before using this product, carefully
check that it will operate
properly and perform its intended function. Check for damaged parts and any other conditions
that may affect the operation of this product. Replace or repair damaged or worn parts immedi-
ately.
REPLACEMENT PARTS AND ACCESSORIES:
When servicing, use only
identical replacement
parts. Only use accessories intended for use with this product.
MAINTAIN THIS PRODUCT WITH CARE.
Keep this product clean and dry
for better and safer
performance.
MAINTENANCE:
For your safety, service and maintenance should be per-formed regularly by a
qualified technician.
USE THE RIGHT TOOL FOR THE JOB.
Do not attempt to force a small
tool or attachment to do
the work of a larger industrial tool. There are certain applications for which this tool was de-
signed. It will do the job better and more safely at the rate for which it was intended. Do not mod-
ify this tool, and do not use this tool for a purpose for which it was not intended.
WARNING:
The warnings, precautions, and instructions discussed in this
manual cannot cover
all possible conditions and situations that may occur. The operator must understand that common
sense and caution are factors, which cannot be built into this product, but must be supplied by
the opera-
