LAUNCH Injector Cleaner & Tester User’s Manual
13
necessary to rerun the fuel pump and injectors.
5. Draining the test liquid in glass tube thoroughly requires
pressing the [Drain] key more times.
The solenoid valves will stop automatically after 15
seconds and it is necessary to drain more times if there
is more liquid.
6. Malfunction code displaying E001.
The malfunction code of E001 is displayed when
the level inside fuel tank is lower than that of the
required level. At this time, the buzzer will ring to
remind user to supply fuel. If this situation appears
during running process, the machine will stop the
fuel pump ten seconds later and make “RUN”
indicator is on the flashing state. After the liquid is
up to the required specification(Press “Drain” key
to drain the liquid into the fuel tank to resume the
liquid level if there is lots of liquid, otherwise,
supply the liquid.), the buzzer will stop ringing. If
you press [RUN] key, the machine will continue to
run the interrupted work.
Precautions
1)
Do not place anything on the control panel to prevent
from breaking the measuring cup because it is made
from vulnerable.
2)
Do not disconnect hose before the system pressure
reaches “0”.
3)
Always ensure that the provided power supply is well
contacted with ground safely.
4)
The unit is designed with warning function. When the
level switch checks the liquid inside the tank less
than the lowest line, the unit will utter the warning
sound and meanwhile stop the fuel pump and
injectors automatically, and then the unit returns to
the stop state. The unit will stop warning until the
liquid is supplied enough, at this time pressing the
“RUN” key will run the unit again.
5)
Clean the control panel in time and Keep the pulse
signal cable away from the liquid.
Warning!
Unauthorized repair may cause the extension of faulty
area of the unit, which will bring trouble to general
repair. Under the state of turning on the power, the
electrical system inside the unit contains the factor
causing danger. Failure to comply with these
instructions could result in death or serious injury.
