LAUNCH TECH X-431 PRO3 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 97

background image

LAUNCH

X-431 PRO3 V4.0 User Manual

14

2 Preparations

2.1 Charging the Tablet

1. Plug one end of the included charging port of the tool, and the other end to

the power adaptor.

2. Connect the other end to the AC outlet.

If appears on the screen, it indicates it is being charged. If the logo changes
into , it indicates that the battery is fully charged. Unplug the power adaptor
from the tablet.

2.2 Using Battery

If the battery remains unused for a long period of time or the battery is

completely discharged, it is normal that the tool will not power on while being
charged. Please charge it for a period of 5 minutes and then turn it on.

Please use the included power adaptor to charge your tool. No responsibility

can be assumed for any damage or loss caused as a result of using power
adaptors other than the one supplied.

While the tablet has low battery, a beep will sound. If it is very low, the tablet

will be switched off automatically.

2.3 Power on/off

2.3.1 Power on

Press [POWER] to turn the tool on.

*Note: If it is the first time you have used this tool or the tool remains idle for a long

period of time, the tool could fail to turn on. Please charge the tool for a minimum of 5

minutes and attempt to turn on again.

2.3.2 Power off

Press [POWER] for 3 seconds, an option menu will pop up on the screen. Tap
“Power off” to turn the tool off.

«
...
19
20
21
22
23
...
»

Содержание X-431 PRO3


































































































Отзывы:

Нет отзывов

Похожие инструкции для X-431 PRO3

Бренд: MacDon Страницы: 89

Бренд: Yates Страницы: 2

Бренд: Salvis Страницы: 40

Бренд: IDEAL Страницы: 2

MicroVersaTrip Plus

Бренд: GE Страницы: 20

Бренд: GE Страницы: 252

Бренд: Balanced Body Страницы: 12

Бренд: Eagle Pro Страницы: 6

Бренд: GE Страницы: 10

Бренд: 1010music Страницы: 2

Бренд: 1010music Страницы: 4

Бренд: ADVANCED HOME CARE Страницы: 16

Бренд: dbx Страницы: 12

Бренд: dbx Страницы: 13

Бренд: dbx Страницы: 72

Бренд: dbx Страницы: 11

Бренд: dbx Страницы: 16

Бренд: JB-Lighting Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды