LAUNCH
X-431 PRO3 V4.0 User Manual
33
• If you have scanned the VIN of the vehicle, tap
to choose it from
the record list.
• In case the handset failed to identify it, tap
to enter it manually.
Note: In general, vehicle identification numbers are standardized - all contain 17
characters. VIN characters may be capital letters A through Z and numbers 1
through 0; however, the letters I, O and Q are never used in order to avoid
mistakes of misreading. No signs or spaces are allowed in the VIN.
• To turn the flash on, tap
.
After scanning, the screen automatically displays the result.
• If the VIN scanned is incorrect, tap the result field to modify it and then tap
“OK”. If the VIN exists on the remote server, the system will enter the
vehicle information screen.
• To scan it again, tap “REPEAT”.
5.2 Local Diagnose
Tap “Local Diagnose” to enter the vehicle selection page. Tap a corresponding
diagnostic software logo, and then follow the on-screen instruction to access the
diagnostic software.
Take Demo as an example to demonstrate how to diagnose a vehicle.
1). Select diagnostic software version: Tap the “DEMO” to go to Step 2
(Note: If
more than one version is available on this handset, it will be listed on the screen.).
