LAUNCH TECH X-431 EURO TAB Скачать руководство пользователя страница 62

Страница: 62 / 130

LAUNCH

X-431 Throttle User Manual

5.4 Manage Reports

Fig. 5-39

5.4.1 Health Report

This module stores all diagnostic reports generated in process of vehicle
diagnosis.

All the diagnostic reports are sorted by Date and Make. Tap the desired type to
re-arrange and filter it.

• To select certain report, check the box before the report. To select all reports,

tap “Select All”. To deselect all, tap “Unselect”.

• To revise the filename of the report, select the desired one and tap

“Rename”.

• To share the report with others, select the desired one and then tap “Share”.
• Select the desired report and then tap “Delete” to delete it.

5.4.2 Remote Report

This option lists all diagnostic reports generated in process of remote
diagnostics.

5.4.3 Playback

If user records the running parameters or waveform graphs while reading data
stream, it will be saved as diagnostic records and appear under this tab.
Tap “Playback”, and select certain diagnostic record to enter.

Содержание X-431 EURO TAB



































































































































Результаты поиска

Содержание X-431 EURO TAB

Отзывы:

Похожие инструкции для X-431 EURO TAB

Бренды по названию

Популярные бренды

LAUNCH TECH X-431 EURO TAB, Руководство пользователя

Результаты поиска

Содержание X-431 EURO TAB

Отзывы:

Похожие инструкции для X-431 EURO TAB

Бренды по названию

Популярные бренды