LAUNCH
X-431 Throttle User Manual
11
3 Preparations
3.1 Charging X-431 Throttle
Choose any of the followings to charge your handset:
A. Use the included 5V power adaptor: Connect one end of the power adaptor to
Type C charging port of the handset, and the other end to the AC outlet.
Never use other similar adaptors to charge it.
B. Use the docking station: Follow the steps described as below to charge your
handset:
1. Locate the charging slot on the bottom of the handset and docking station.
2. Align the charging slots, and then dock the tablet into the station to ensure
that it is firmly seated on the docking station.
3. Insert one end of the included power cord to the charging port of the docking
station, then the other end into the AC outlet. The charging LED illuminates
solid red while charging.
4. Once it illuminates solid green, it indicates that the battery is fully charged.
Disconnect the docking station from the AC outlet.
3.2 Using Your Battery
If the battery remains unused for a long period of time or the battery is
completely discharged, it is normal that the tool will not power on while being
charged. Please charge it for a period of 5 minutes and then turn it on.
Please use the included power adaptor to charge your tool. No responsibility
can be assumed for any damage or loss caused as a result of using power
adaptors other than the one supplied.
While X-431 Throttle has low battery, a beep will sound. If it is very low, X-431
Throttle will be switched off automatically.
3.3 Power on/off
3.3.1 Power on
Press [POWER] to turn the tool on.
*Note: If it is the first time you have used this tool or the tool remains idle for a long
period of time, the tool could fail to turn on. Please charge the tool for a minimum of 5