- 40 -
Press PRINT to store and print weight values and number of weighing (
), see section
PRINTING EXAMPLES
.
If an input is configured as
, closing that input gives you the same functions as if you had
pressed PRINT.
TOTALIZATION NOTES: the weight is only totalized and printed if not 0; if the instrument is metric
the weight has to satisfy metric conditions (stabled weight and equal to at least 20 divisions)
whatever the settings selected.
AUTOMATIC TOTALIZATION: totalization takes place when the weight is stable after a variation; if
a
value has been set, the weight must drop under that value first, then go up again and become
stable; after a number of totalizations equal to what was set in
the number of weighing,
partial weight and total weight are printed and deleted automatically.
If the
function is enabled the weight remains blocked and is preceded by the letter
; press
PRINT to continue.
Press START to access the following displays:
-
: number of weighing;
-
: totalized partial weight and date of last deletion;
-
: total weight and date of last deletion;
Print of number of weighing, totalized partial weight and total weight
: press PRINT while
displaying total weight or number of weighing.
Deletion of number of weighing and totalized partial weight
: press START while displaying
number of weighing and confirm message
pressing ENTER.
Deletion of number of weighing and totalized partial weight, total weight: press
START while
displaying total weight and confirm message
pressing ENTER.
In totalizer mode you can:
-
set weight to zero for small variations (press
0
and confirm with ENTER);
-
set semi-automatic tare (press TARE);
-
WDESK – WINOX: to exit totalizer mode and return to standard operations, press
START for 3 seconds, the selected type of totalization appears (
,
,
); press ESC, select the
operating mode and confirm with ENTER. If no
setpoint is enabled, you can return to standard operations also by pressing MENU.
-
WTAB: to exit totalizer mode and return to standard operations, press MODE, the
selected type of totalization appears (
,
,
); press ESC, select the
operating mode and confirm with ENTER.
