Lauda LRZ 930, Руководство по эксплуатации

Страница: 8 / 40

2.2 Information about the interface module

Always disconnect the constant temperature equipment from the power
supply before installing the interface module or connecting interfaces.

Always take the recommended safety measures against electrostatic
discharge before handling interface modules.

Avoid touching the circuit board with metallic tools.

Do not start up the constant temperature equipment before installation
of the interface module is complete.

Store any unused interface modules in their packaging in accordance
with the specified ambient conditions.

Use only suitable cables of sufficient length for cable connections.

Make sure that the protective screen on the cables and connec-
tors complies with EMC regulations. LAUDA recommends using pre-
assembled cables.

Always lay cables correctly so that they do not pose a tripping hazard.
Secure the laid cables and make sure that they cannot be damaged
during operation.

Check the condition of the cables and interfaces prior to each opera-
tion.

Immediately clean any soiled parts, in particular unused interfaces.

Make sure that the signals transmitted via the interface correspond to
the permitted operating parameters of the interface module.
2.3 Personnel qualification
Only specialized personnel are permitted to install interfaces modules. Spe-
cialized personnel are personnel whose education, knowledge, and experi-
ence qualify them to assess the function and risks associated with the device
and its use.
Specialized personnel
V1 Interface module LRZ 930 8 / 38