Lauda ECO GOLD, Руководство по эксплуатации

Страница: 88 / 136

88 / 137
ECO Gold 10/2019 i
12.4 Setting the display brightness
The ECO range of thermostats have a sensor which automatically adapts the display brightness according to the ambi-
ent light level. However, the automatic adaptation can be deactivated and the brightness set manually.

Access to the main menu level is obtained by pressing the enter
key .
 Selection and confirmation of

Setup

Basic setup

Display

Brightness .
The adjacent menu window appears.

Select "automatic", "level" or "off" with or . The selected level
is immediately active without confirmation.
-
By pressing (ESC), or you are returned to the menu level without any change.
12.5 Defining the starting mode (Autostart)
Generally, it is required that the thermostat starts operating again after a power interruption. For reasons of safety, for
example, you can insert a manual activation step.

Access to the main menu level is obtained by pressing the enter
key .
 Selection and confirmation of

Setup

Basic setup .
The adjacent menu window appears. As well as Autostart the current
setting is stated. This is "off" or "on"

Select Autostart with .

Select the operating status "off" or "on" with or and confirm
with .
If "off" is selected, standby operation is activated after a mains inter-
ruption.
With the setting "on" the device continues running straight after the
mains interruption.
-
By pressing or (ESC) you are returned to the menu level without any change.