IPUG39_02.9, December 2010
14
10 Gb+ Ethernet MAC IP Core User’s Guide
The IPexpress™ tool is used to create IP and architectural modules in the Diamond and ispLEVER software. Refer
to
“IP Core Generation” on page 16
for a description on how to generate the IP.
Table 3-1
provides the list of user configurable parameters for the 10 Gb+ Ethernet MAC IP core. The parameter
settings are specified using the 10 Gb+ Ethernet MAC IP core Configuration GUI in IPexpress.
Table 3-1. 10 Gb+ Ethernet MAC IP Core Configuration Parameters
Figure 3-1
shows the 10 Gb+ Ethernet MAC IP Core configuration dialog box.
Figure 3-1. 10 Gb+ Ethernet MAC IP Core Configuration Dialog Box
Parameter Descriptions
This section describes the available parameters for the 10 Gb+ Ethernet MAC IP core.
Multicast Address Filter
This parameter determines whether the optional Multicast Address Filtering will be included in the core’s imple-
mentation.
Parameter
Value Range
Default
Core Generation Options
Multicast Address Filter
Include/Not Include
Not Include
Evaluation Generation Options
PHY Interface
XGMI/XAUI
XGMI
Clock Constraints
10G/12G
10G
Management Statistics
Include/Not Include
Not Include
Bits in Counters[13-40]
16-40
16
Chapter 3:
Parameter Settings
