3
ENGLISH
INTRODUCTION
Thank you for purchasing the LaTrax Alias quad rotor high-performance helicopter. This manual
contains all the necessary operating procedures that allow you to unlock the performance and
potential that our engineers designed into your model.
Even if you are an experienced R/C
enthusiast, it’s important to read and follow the procedures in this manual.
We want you to feel confident that you own one of the best-performing models in the market
and that it is backed by a team of professionals who aim to provide the highest level of factory
support possible. Our Customer Support team is with you every step of the way. If you have
any questions about your model or its operation, call the LaTrax Technical Support Line toll-free
at: 1-888-872-9927
(Toll-free support is available to U.S. residents only).
QUICK START GUIDE
See the included Quick Start Guide for initial setup of your helicopter.
The Quick Start Guide
is not intended to replace the full operating instructions available in this manual. Please
read this entire manual for complete instructions on the proper use and maintenance of
your helicopter.
INCLUDED SUPPORT EQUIPMENT
t
650mAh LiPo battery
t
USB-powered battery charger
t
1.5mm hex wrench
(to assist with repairs)
t
4 Traxxas AAA alkaline batteries
t
Spare rotor blade set
t
Spare hardware
t
Control sticks
FLIGHT CONTROLS
Throttle Control
t*ODSFBTFUISPUUMFBMUJUVEF
Push throttle stick forward
t%FDSFBTFUISPUUMFBMUJUVEF
Pull throttle stick back
Rudder Control
t3PUBUFMFGU
Move throttle stick left
t3PUBUFSJHIU
Move throttle stick right
Elevator Control
t'MZGPSXBSE
Push flight stick forward
t'MZCBDLXBSE
Pull flight stick back
Aileron Control
t4JEFXBZTMFGU
Move flight stick left
t4JEFXBZTSJHIU
Move flight stick right
Accessory Control Stick Installation
The included accessory control
sticks are interchangeable
with the thumb pads on your
transmitter. Twist and pull on
the thumb pad to remove it
from the transmitter, and install
the control stick in its place.
KC1829-R01-Alias-Owners-Manual-130916.indd 3
9/16/13 5:24 PM
